A plant holding bed is a luxury that anyone who propagates plants might find very useful. (I know I will!) A plant holding bed can function as a coldframe or just as an out of the way spot set aside for plants to rest in while they grow. For me I just have too many propagated plants to continue storing them on our front porch - that's not what a front porch is for is it? Building the hold bed was simply the next logical choice!
How to Build a Plant Holding Bed
This isn't rocket science but building a raised bed does require some thought. I spent some time (several minutes ;)) trying to figure out a good location that was out of the way and doesn't utilize yard space that we are actively using. The lower portion of this slope near the garden shed seemed ideal. It isn't close to the house but with an extra long garden hose I can get access to water. I'm also hoping to add a rain barrel to the side of my garden shed which would make an easy and free water source nearby.
The next step was actually figuring out the shape I wanted and staking it out. By staking the outline of the beds I could remove the soil and dig the bed into the slope of the hill. I left a lip on the back side of the beds to prevent runoff water from going straight into the raised bed. I used a tiller to break up the surface of the soil, a rake, and a shovel to level the ground above the holding bed.
Then I set about building the rectangular portion of the bed. I used corner posts to screw (deck screws) in the boards which makes it easy to square off the corners. (Dimensions 4'x8') The corner posts are measured to the height of two board widths to make a nice fit (approx. 11 inches).
After the first level of the rectangular center bed was built I added the triangles on either side. The back board is 4 ft. long which I attached using another corner piece. The long hypotenuse side (geometry was a very useful class!) was measured and cut using 45 degree angles on the ends.
Here is the location after the first portion of the bed was built.
Once the bottom level was complete it was easy to measure and cut the remaining board for the top layer.
The next step will be to add a cover to it to prevent our resident wildlife population from enjoying the plants more than I do! I have two thoughts on that:
The wood would look nicer but PVC is be light weight and cheap. And I really like cheap! The wood also gives me added support if I choose to lay a window over the bed to covert it into a cold frame.
- Use a PVC pipe frame with a plastic mesh over it or
- Build a wood frame with a mesh.
Here's where you can see how it fits in with the landscape. The future bed will house many of our strawberry plants that have overtaken the vegetable garden. That bed will be almost 27 feet long and will help to create a terraced hillside look. In between the two beds is a pathway wide enough for the riding mower to journey through.
I'll post more on the hill-scape when the next section is added!
Labels: garden projects, plant propagation, raised beds